MSAR warrants against factory defects - customer ships at their expense to MSAR Warranty Department with explanation of the problem experiencing along with a valid physical address (guns cannot be sent to a PO Box or General Delivery) and telephone number. If determined to be defective, the gun is repaired /replaced at MSAR's discretion and returned at MSAR's cost. If gun is replaced, customer must provide a location holding a current FFL for shipping and pay any fee's associated with the transfer and any additional fee's imposed by the locality or business.

If the failure of the gun is determined by MSAR to be the result of the customer's action (i.e. improper maintenance, use of improper ammunition, or abuse outside normal wear), the Warranty Department will contact the customer and provide a repair estimate to include return shipping cost's. In the event the customer does not wish MSAR to repair the gun, it will be returned to the customer "as is" with no other action.

42 ROUND MAG ANNOUNCEMENT

If anyone with a Limited Edition did not receive the 42 round magazine with their kit, please call us with your serial number and invoice number. If you have ordered a 42 round mag and paid for it, please call us with your info and we will get those shipped.

Thank you,

Customer Service

814-363-9260

SPECIAL ANNOUNCEMENT

To our valued customers, distributors, dealers, and friends...

As of January 9th, 2008, we regret that Robert Schleicher and Mike Sweeney are no longer with MSAR and Microtech. We are happy to announce that Karl Walter is our new Executive Vice President and will be in charge of our transitions as we progress into the small arms market. We will be temporarily halting all of our knife production as we get transitioned and geared toward our small arms production. Our focus will be concentrated on our firearms programs. We will return to our full knife production and introduce our new knife lines at SHOT Show 2009 in Orlando. During this down time, we will continue to warranty our knives just as we always have. Also, from this point forward, we will be gearing all of our available production of small arms to our distributors. If you are a dealer interested in carrying our small arms product lines, please contact one of our distributors listed on the web site. If you have any questions about existing orders, please contact Dan Frazier or Karl Walter.

Thank you,

Anthony & Susan Marfione

MSAR

AMMUNITION ADVISORY from TONY

To all STG-556 owners. I have said this before and I will say it again. If you are having ANY reliability problems at all with your STG-556, let me know and we will work closely with you to remedy the problems at our expense. If there are certain ammo issues with questionable ammo, we are willing to investigate the problems and try to remedy these also. We will do some extensive testing with some of this ammo and determine if it is ammo or gun related. We use Lake City, Federal, Winchester FMJ, and Remington 55gr for all of our testing. The reason why we use domestic ammunition is for the simple fact that we have a level of accountability here that you cannot anticipate having with companies located overseas, such as Wolf, Norinco, just to name a few. A majority of the import ammunition or inexpensive alternative import ammo brands are very difficult for us to aquire in steady and large enough quantity to establish an appropriate and accurate base line. We will however try to get some of it so we can perform some test firing with it unfortunately I do not believe I am going to be able to guarantee performance with certain brands. We will thoroughly document this testing with video and data collection to try and determine specific problem areas if there be any. As with any high end product, most times you need to feed a premium engine, premium fuel to expect top performance. Any of you who needs to contact me please do so. I am available for questions almost 24-7. Regardless of any outcome that we find regarding ammunition types that do not properly function we are committed to your safety and satisfaction. I will be out of the office from the 6th through the 9th of this month, but, still feel free to call me anytime on my cell phone. Thanks, Tony Marfione, VP MSAR Cell Phone: 814-558-5333

OWNERS MANUAL CORRECTION

In your owner's manual on page 19, please replace the following paragraph:
-- Grasp the tab on the rear of the hammer group and pull the hammer group out of the stock (Figure 21).
With this paragraph:
-- Grasp the tab on the rear of the hammer group while pressing down the last round bolt hold open release, and pull the hammer group out of the stock (Figure 21).

NOTICE

We at MSAR are very proud to announce the addition of Ellett Brothers as a distributor for our rifles... Ellett Brothers is an award winning distributor. They received the 2007 Shooting Industry Distributor of the Year Award as well as numerous other prestigious awards in past years. A hearty welcome to Ellett Brothers... as our newest industry partner!

STG-556 REPAIR NOTICE LINK

For those of you that received the letter regarding 30 and 42 round magazines, please disregard that letter and follow the below link to a new letter...Please go to the following link for details on the STG-556 REPAIR/UPGRADE NOTICE...

|REPAIR INFO LINK|

ATTENTION

As of January 8th, 2008, we still have Limited Editions of the STG-556™ available. Please contact Keith Adkins at 814.363.9260 Ext. 19 for more info. We are in full production and we have plenty of regular production rifles rolling off the line also. Our newest distributor, RSR Group, has dealer quantities in stock for those dealers that need them.

*The $2000.00 MSRP price for the STG-556 "Limited Edition" rifles was a promotional pricing that was announced at the 2007 SHOT show. Any sales of the Limited Edition rifles after Sept. 24th, 2007 will be at the $2499.00 MSRP price that is the normal Limited Edition price.

This is what the "Limited Edition" kit looks like.

What's New